HP (Hewlett-Packard) 9050MFP User Manual
ENWW
Correcting output quality problems 157
Correcting output quality problems
The first step in correcting output quality problems is to determine if the image defect is present
when copying and printing, or only when copying. If the image defect is present only when
copying, see
when copying and printing, or only when copying. If the image defect is present only when
copying, see
If the image defect is present only when printing, use the examples in the image defect table to
determine which print quality problem you are experiencing, and then see the corresponding
reference pages to troubleshoot the problem.
determine which print quality problem you are experiencing, and then see the corresponding
reference pages to troubleshoot the problem.
Note
The following examples depict letter-size paper that has passed through the MFP long-edge first.
(If the paper has passed through the MFP short-edge first, lines and repeating defects will run
vertically rather than horizontally.)
(If the paper has passed through the MFP short-edge first, lines and repeating defects will run
vertically rather than horizontally.)
See Specks
See Lines