HP (Hewlett-Packard) 9050MFP User Manual
214 Appendix C MFP memory and expansion
ENWW
Installing memory
To install DDR memory DIMMs
Use this procedure to install additional memory. Before you begin, print the configuration (touch
Menu
, touch
Information
, and then touch
Print Configuration
) to find out how much memory
is installed in the MFP before adding more memory. The table lists the maximum amount of
memory allowed for each DIMM slot.
memory allowed for each DIMM slot.
CAUTION
Static electricity can damage DDR DIMMs. When handling DDR DIMMs, either wear an antistatic
wrist strap or frequently touch the surface of the DIMM antistatic package, then touch bare metal
on the MFP.
wrist strap or frequently touch the surface of the DIMM antistatic package, then touch bare metal
on the MFP.
To install memory
1
If you have not already done so, print the configuration to find out how much memory is
installed in the MFP before adding more memory.
installed in the MFP before adding more memory.
2
Turn the MFP off. Disconnect the power cord and any cables.
Slot label on the
Configuration page
Configuration page
Slot label on the
Formatter board
Formatter board
Description
Slot 1
J1
256 MB
Slot 2
J2
Empty
Total
256 MB