HP (Hewlett-Packard) 9050MFP User Manual
40 Chapter 1 The basics
ENWW
Configuring the trays by using the Paper Handling menu
You can configure the paper type and size for the input trays without a prompt on the MFP control
panel display. Use the following procedure to gain access to the Paper Handling menu and
configure the trays.
panel display. Use the following procedure to gain access to the Paper Handling menu and
configure the trays.
To configure the paper size for a tray
1
Touch
MENU
.
2
Touch
PAPER HANDLING
.
3
Touch
TRAY N SIZE
.
4
Touch the paper size loaded.
5
Touch
EXIT
to exit the menus.
Note
Depending on the size that you selected, the MFP might prompt you to move the Custom/Standard
switch in the tray to another position. The MFP might also prompt you to move the paper guides.
Follow the instructions on the control panel, and then close the tray.
switch in the tray to another position. The MFP might also prompt you to move the paper guides.
Follow the instructions on the control panel, and then close the tray.
To configure the paper type for a tray
1
Touch
MENU
.
2
Touch
PAPER HANDLING
.
3
Touch
TRAY N TYPE
.
4
Touch the paper type loaded.
5
Touch
EXIT
to exit the menus.