HP (Hewlett-Packard) L7300 User Manual
To set a static IP address
1. Open the embedded Web server, click the Networking tab, click Wired (802.3) or
1. Open the embedded Web server, click the Networking tab, click Wired (802.3) or
Wireless (802.11) in the left pane, and then click the IP Configuration sub-tab.
2. Select Manual IP, and then type the static IP address in the Manual IP Address
box.
3. Enter the Manual Subnet Mask and the Manual Default Gateway, if necessary,
and then click Apply.
CAUTION:
Changing the IP address can disrupt the current connection to the
embedded Web server.
Solve printing problems
•
•
•
•
•
•
•
•
•
The device shuts down unexpectedly
Check the power and power connections
Make sure the device is connected firmly to a functioning alternating current (AC)
power outlet. For voltage requirements, see
Make sure the device is connected firmly to a functioning alternating current (AC)
power outlet. For voltage requirements, see
Error message appears on control-panel display
A non-recoverable error has occurred
Disconnect all cables (such as power cord, network cable, and USB cable), wait about
20 seconds, and reconnect the cables. If the problem persists, visit the HP Web site
(
Disconnect all cables (such as power cord, network cable, and USB cable), wait about
20 seconds, and reconnect the cables. If the problem persists, visit the HP Web site
(
) for the latest troubleshooting information, or product fixes and
updates.
The device is not responding (nothing prints)
If the device supports wireless communication, see also
Check the device setup
For more information, see
For more information, see
.
Chapter 10
158
Maintain and troubleshoot