HP (Hewlett-Packard) 5000 User Manual

Service Tests and Utilities

4-24

HP DesignJet 5000 Series Printers Service Manual

The purpose of this Service Utility is to set the Printer Model, the 
Serial Number and Japanese Fonts. This is required in the following 
situations:

n

The Main PCA and Hard Disk Drive are replaced at the same 
time (EEROM empty).

n

The Hard Disk Drive and Main PCA are replaced at the same 
time and the Main PCA has already been used (valid EEROM 
content); the Printer backs up the data to the Hard Disk Drive 
storing wrong values for the current Printer.

n

The main PCA EEROM and the Hard Disk Drive EEROM 
backup are valid at initialization but data is conflicting because 
they do not come from the same Printer (they have a different 
Model Number or Serial Number), and the user has performed 
the Backup EEROM Utility incorrectly (See Page 4-31).

n

Both the Main PCA EEROM and the Hard Disk Drive EEROM 
backup are corrupt or fail during Printer initialization.

1. In the Service Utilities submenu, scroll to "1.4 EEROM  Setup " and 

press Enter.

2. The following options are displayed for EEROM setup. Press Enter 

once you have made your selection:

1. Service Utilities

1.3 Altitude Setup

1.2 Prime TUBES

1.4 EEROM Setup
1.5 Reset Life Counters 
1.6 Backup EEROM

↑
↓

1.1 Turn DRIVE ROLLER 

1.4 EEROM  Setup 

↑
↓

1.4.1 Set Model Number
1.4.2 Set Serial Number
1.4.3 Set Japanese Font