HP (Hewlett-Packard) 5000 User Manual
Removal and Installation
8-23
HP DesignJet 5000 Series Printers Service Manual
Back Cover
Removal
WARNING
Switch off the Printer and remove the Power Cord.
NOTE
Refer to the table on Page 8-4 for information on screw types.
1. Remove the Top Cover - Refer to
NOTE
Support the Back Cover as it
is released.
is released.
2. Remove the following (Type B)
screws from the upper part of the
Back Cover:
Back Cover:
n
8 Screws (T-15) for the 60" Model.
n
6 Screws (T-15) for the 42" Model.
3. Remove 3 T-15 screws (Type N) from
the lower part of the Back Cover.