HP (Hewlett-Packard) 5000 User Manual

Page of 404
Removal and Installation
8-36
HP DesignJet 5000 Series Printers Service Manual
Trailing Cable
Removal 
WARNING
Switch off the Printer and remove the Power Cord.
NOTE
Refer to the table on Page 8-4 for information on screw types.
1. Remove the Top Cover - Refer to 
2. Remove the Right Rear Cover - Refer 
3. Remove the Right Hand Cover - Refer 
4. Remove the Left Hand Cover - Refer 
5. Slide the Carriage to the left side of 
the Printer. 
6. Unclip and remove the Carriage 
Cover to access the Trailing Cable in 
the Carriage.