HP (Hewlett-Packard) 5000 User Manual
Removal and Installation
8-77
HP DesignJet 5000 Series Printers Service Manual
Electronics Module Cover
Removal
WARNING
Switch off the Printer and remove the Power Cord.
NOTE
Refer to the table on Page 8-4 for information on screw types.
1. Remove the LAN Card - Refer to
2. Remove Left Rear Cover - Refer to
3. Remove Right Rear Cover - Refer to
4. Remove the Ferrites from the Ferrite
Holder on the right side.
5. Remove 15 T-15 screws (Type B)
from the Electronics Module Cover.
Push clip to release Ferrite