HP (Hewlett-Packard) 5000 User Manual
Removal and Installation
8-113
HP DesignJet 5000 Series Printers Service Manual
3. Remove the complete Center Platen
Assembly (includes the Overdrive
Assembly and the Cutter guide).
Assembly and the Cutter guide).
NOTE
You must perform the
following Calibrations when
the Center Platen Assembly
is replaced:
following Calibrations when
the Center Platen Assembly
is replaced:
n
Scan Axis Calibration
⇒
n
Carriage Height Calibration
Installation of the Center Platen Assembly
NOTE
When installing the Center Platen, apply grease to the Overdrive
Wheels.
Wheels.
WARNING
When installing the Center Platen Assembly, make sure the foam
guides under the Platen are placed in their slots as shown below.
guides under the Platen are placed in their slots as shown below.