APC 16-Port IP KVM AP5405 Leaflet
Product codes
AP5405
5
Perform Basic Network Configuration
Do one of the following to assign a static IP address to the IP KVM and to specify the subnet mask and other
networking parameters:
networking parameters:
• Through a console connection to the console port, log in and use the wiz command.
• Through a local KVM connection to the User 1 or User 2 ports, log into the On Screen Display (OSD) and
configure networking through the network screen.
See “Configuring Basic Networking Using the OSD” on page 8.
See “Configuring Basic Networking Using the OSD” on page 8.
Before you start, collect the following network information from your network administrator.
Configuring Basic Networking Using the wiz Command
The following procedures require a hardware connection between the console port of the IP KVM and the
COM port or USB port (through a USB-to-serial adapter) of a computer. See “To Connect a Computer to the
Console Port” on page 4.
COM port or USB port (through a USB-to-serial adapter) of a computer. See “To Connect a Computer to the
Console Port” on page 4.
To Log Into the IP KVM Through the Console
From your terminal emulation application, log into the console port as root.
As shown in the preceding screen, the default password is apc.
Hostname:
Public IP address of the IP KVM:
Domain name:
IP address of the DNS server:
Gateway IP address:
Subnet mask:
MAC address of the IP KVM:
IP address of the NTP server:
KVM login: root
Password: apc
Password: apc