Sony AR-208S User Manual
- 18 -
USING THE NETWORK SCANNER FUNCTION
2
TRANSMISSION METHODS FOR SCAN TO E-MAIL
The e-mail address for a Scan to E-mail transmission can be entered manually or selected from e-mail addresses
stored on an LDAP server.
stored on an LDAP server.
Sending an image by entering an e-mail address manually
1
Press the [MODE SELECT] key to
select scanner mode.
select scanner mode.
The "SCAN" indicator
lights up to indicate that
scanner mode is
selected.
lights up to indicate that
scanner mode is
selected.
2
Place the original in the document
feeder tray or on the document glass.
feeder tray or on the document glass.
For information on how to place the original, see
"
"
3
Select "INPUT ADDRESS" and press
the [ENTER] key.
the [ENTER] key.
If "INPUT ADDRESS"
does not appear, make
sure that "Scan to ad-hoc
E-mail" is enabled in the
Web page (
does not appear, make
sure that "Scan to ad-hoc
E-mail" is enabled in the
Web page (
4
Enter the destination e-mail address
and press the [ENTER] key.
and press the [ENTER] key.
To enter characters, see
"
"
5
Press the [
] key (
) or [
] key
(
) to select the original size and
then press the [ENTER] key.
The original size
changes as follows each
time the [
changes as follows each
time the [
] key (
)
or [
] key (
) is
pressed:
"8.5x11"
"8.5x11"
→"8.5x5.5"
→"A4"→"B5"→"A5"
→"8.5x14"→"8.5x13".
6
Press the [START] key (
) to begin
scanning.
SCAN USING:
INPUT ADDRESS
INPUT ADDRESS
The original is scanned using the settings of
the scan mode that has the "Default Scan
Mode" checkbox selected.
the scan mode that has the "Default Scan
Mode" checkbox selected.
INPUT ADDRESS
XXX@XX.XXX.com
XXX@XX.XXX.com
ORIG. SIZE ENTER
8.5X11
8.5X11
Note