Apple 220-240 V User Manual
6.
Press the [ ] or [ ] key to select [Change (HEX)] or [Change (ASCII)], and then press the
[ Enter] key.
[ Enter] key.
7.
Press the [ ] or [ ] key to enter the characters, and then press the [ Enter] key.
When entering a character, pressing the [ Enter] key will mask it with an asterisk for security reasons.
When using 64 bit WEP, up to 10 characters can be used for hexadecimal and up to five characters
for ASCII. When using 128 bit WEP, up to 26 characters can be used for hexadecimal and up to 13
characters for ASCII.
The number of characters that can be entered is limited to 10 or 26 for hexadecimal and 5 or 13 for
ASCII.
For ASCII character strings, each uppercase and lowercase letter is recognized respectively.
When using 64 bit WEP, up to 10 characters can be used for hexadecimal and up to five characters
for ASCII. When using 128 bit WEP, up to 26 characters can be used for hexadecimal and up to 13
characters for ASCII.
The number of characters that can be entered is limited to 10 or 26 for hexadecimal and 5 or 13 for
ASCII.
For ASCII character strings, each uppercase and lowercase letter is recognized respectively.
8.
Press the [Online] key.
The initial screen appears.
9.
Print a configuration page to confirm the settings made.
• In the case of using a WEP key on a network, activate the WEP setting to be used for communication
along with WEP.
• Confirm the network administrator for the WEP Key to use.
• "Printing the Test Page", Quick Installation Guide.
• Web Image Monitor Help
• Web Image Monitor Help
Setting WPA
In the case of using WPA on a network, activate the WPA setting to be used for communication along with
WPA. Consult your network administrator for information about making authentication settings.
WPA. Consult your network administrator for information about making authentication settings.
4. Configuration
66
4