APC AP9290 User Manual

USER’S GUIDE

Vertical Console Port Server

port set <port> [-f <flow-control>] -

Set the flow control parameters.

This value is specified as a plus sign-separated ( + ) list of options. The
flow-control options are:

•

ixon

- Enable XON/XOFF flow control on output

•

ixany

- Enable any character to restart output

•

ixoff

- Disable XON/XOFF flow control on input

•

crtscts

- Enable RTS/CTS (hardware) flow control

port set <port> [-o <options>] -

Set the port communication options.

This value is specified as a plus sign-separated ( + ) list of options. Port
communication options are:

•

cstopb

- Set two stop bits instead of one.

•

hupcl

- Lower modem control lines after the last process closes the

device (hangs up).

•

striphigh

- Remove the high bit from all data coming from this

console and all clients connected to this console before processing.

port set <port> [-n <port-name>] -

Set the name of the specified port.

port set <port> [-m <motd>] -

Set the message of the day that will be

displayed when a user logs into the port.

port set <port> [-t <idletimeout>] -

Set the idle timeout for the port.

port set <port> [-i <idlestring>] -

Set the string to be sent to the port

after the idle timeout has expired.

port set <port> [-k <break-seq-number>] -

Set the break sequence sent

with the ‘

’ port mode command.

port set <port> [-a <accessmode>] -

Set the remote access mode for

this port to either Telnet or SSH.