Toshiba A60 User Manual
User’s manual
4-26
O
PERATING
B
ASICS
Modem
This section describes how to connect and disconnect the internal modem to and
from a telephone jack.
from a telephone jack.
NOTE: The internal modem does not support voice functions. All data
and fax functions are supported.
and fax functions are supported.
CAUTIONS: 1. In case of a lightning storm, unplug the modem cable
from the telephone jack.
2. Do not connect the modem to a digital telephone line.
A digital line will damage the modem.
Region selection
Telecommunication regulations vary from one region to another, so you will need to
make sure the internal modem’s settings are correct for the region in which it will be
used.
To select a region, follow the steps below.
make sure the internal modem’s settings are correct for the region in which it will be
used.
To select a region, follow the steps below.
1. In Windows XP, click
start
, point to
All Programs
, point to
TOSHIBA
,
point to
Networking
and click
Modem Region Select
.
NOTE: Do not use the Country/Region Select function in the Modem
setup utility in the Control Panel if the function is available. If you
change the Country/Region in the Control Panel, the change may not
take effect.
setup utility in the Control Panel if the function is available. If you
change the Country/Region in the Control Panel, the change may not
take effect.
2. The Region Selection icon will appear in the Windows Task Bar.
Figure 4-8 The Region Selection icon (Windows XP)
3. Click the icon with the primary mouse button to display a list of regions that
the modem supports. A sub menu for telephony location information will also
be displayed. A check will appear next to the currently selected region and
telephony location.
be displayed. A check will appear next to the currently selected region and
telephony location.
4. Select a region from the region menu or a telephony location from the
submenu.