Toshiba A60 User Manual
4-31
O
PERATING
B
ASICS
LAN
The computer has built-in support for Fast Ethernet LAN (100 megabits per
second, 100BASE-Tx). This section describes how to connect/disconnect to a
LAN.
second, 100BASE-Tx). This section describes how to connect/disconnect to a
LAN.
CAUTION: Do not install or remove an optional memory module while
Wake-up on LAN is enabled.
Wake-up on LAN is enabled.
NOTE: The Wake-up on LAN function consumes power even when the
system is off. Leave the AC adaptor connected while using this feature.
system is off. Leave the AC adaptor connected while using this feature.
Connecting LAN cable
CAUTION: The computer must be configured properly before connecting
to a LAN. Logging onto a LAN using the computer’s default settings
could cause a malfunction in LAN operation. Check with your LAN
administrator regarding set-up procedures.
to a LAN. Logging onto a LAN using the computer’s default settings
could cause a malfunction in LAN operation. Check with your LAN
administrator regarding set-up procedures.
If you are using Fast Ethernet LAN (100 megabits per second, 100BASE-TX), be
sure to connect with a category 5 cable (CAT5) or higher.
To connect the LAN cable, follow the steps below.
sure to connect with a category 5 cable (CAT5) or higher.
To connect the LAN cable, follow the steps below.
1.
Turn off the power to the computer and to all external devices connected to
the computer.
the computer.
2.
Plug one end of the cable into the LAN jack. Press gently until you hear the
latch click into place.
latch click into place.
Figure 4-11 Connecting the LAN cable
LAN