Toshiba A60 User Manual
7-6
User’s Manual
HW S
ETUP
AND
P
ASSWORDS
You can override the settings and manually select a boot device by pressing one of
the following keys while the computer is booting:
the following keys while the computer is booting:
U
Selects the USB diskette drive.
N
Selects the Network.
1
Selects the primary HDD.
C
Selects the CD-ROM*.
This procedure does not affect the settings.
*
In this computer, CD refers to the DVD-ROM, CD-RW/DVD-ROM, DVD-R/-
RW, DVD+-R/+-RW or DVD Super Multi drives.
RW, DVD+-R/+-RW or DVD Super Multi drives.
To change the boot drive, follow the steps below.
1. Hold down
F12
and boot the computer.
2. The following manu will be displayed.
3.
Use the up/down cursor keys to select boot device you want and press
Enter.
NOTES:
1.
If a supervisor password is set, the menu above does not
appear when you use the user password to start the
computer.
appear when you use the user password to start the
computer.
2.
The selection method above does not change the boot
priority settings in HW Setup.
priority settings in HW Setup.
3.
If you press a key other than one of those above or if the
selected device is not installed, the system will boot
according to the current setting in HW Setup.
selected device is not installed, the system will boot
according to the current setting in HW Setup.
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in standby mode, you can turn on
the computer by pressing any key. It is effective only for the internal keyboard and
only when the computer is in standby mode.
the computer by pressing any key. It is effective only for the internal keyboard and
only when the computer is in standby mode.
Enabled
Enables Wake-up on Keyboard.
Disabled
Disables Wake-up on Keyboard. (Default)