Toshiba A60 User Manual

You can connect any standard Centronics-compatible parallel printer to your
computer. All you need is an IBM PC™ parallel printer cable. Your dealer can
supply one or you can purchase one at most computer stores.

The cable’s connectors are designed so that it is impossible for you to connect
them incorrectly. You can also connect a parallel printer . To connect a printer,
follow these steps:

1.

Turn off the computer.

2.

Insert one end of the cable into the computer’s parallel port.

3. Tighten the screws that fasten the cable connector to the computer’s parallel

port.

4.

Insert the other end of the cable into the printer’s parallel connector.

5. Fasten the connector to the printer with the clips on the parallel port.

6. Turn on the printer.

7. Turn on the computer.

8. Start the Hardware Setup program. Refer to Chapter 7 

9. Select the 

     tab from the 

window.

10. Set the 

 and press 

.

11. Choose Reboot for the change to take effect.

12. Select the printer in Windows Add Print Wizard. To access the 

utility, click 

, point to 

, click 

 and double

click the 

 icon.

An external analog monitor can be connected to the external monitor port on the
computer. The computer supports VGA and Super VGA video modes. To connect a
monitor, follow the steps below.