Toshiba A60 User Manual
F-3
A
PPENDIX
F
When installing Wireless LAN cards, the channel configuration is managed as
follows:
follows:
◆
For wireless clients that operate in a Wireless LAN Infrastructure, the
Wireless LAN card will automatically start operation at the channel
identified by the Wireless LAN Access Point. When roaming between
different access points the station can dynamically switch to another
channel if required.
Wireless LAN card will automatically start operation at the channel
identified by the Wireless LAN Access Point. When roaming between
different access points the station can dynamically switch to another
channel if required.
◆
For Wireless LAN cards installed in wireless clients operating in a peer-to-
peer mode, the card will use the default channel 10.
peer mode, the card will use the default channel 10.
◆
In a Wireless LAN Access Point, the Wireless LAN card will use the
factoryset default channel (printed in bold), unless the LAN Administrator
selected a different channel when configuring the Wireless LAN Access
Point device.
factoryset default channel (printed in bold), unless the LAN Administrator
selected a different channel when configuring the Wireless LAN Access
Point device.
Wireless IEEE 802.11 Channels Sets (Revision A)
Frequency Range Channel ID
5150-5850 MHz
Note
36
5180
40
5200
44
5220
48
5240
52
5260
56
5280
60
5300
64
5320
149
5745
US only *
153
5765
US only *
157
5785
US only *
161
5805
US only *
* Available Area: US (USA, CANADA) only
A peer-to-peer mode is available under the following condition:
A Wireless LAN card receives a “US county/region code” beacon of the standard
IEEE 802.11 (Revision D) from a Wireless LAN Access Point.
IEEE 802.11 (Revision D) from a Wireless LAN Access Point.
Appendix F