Fujitsu 500 User Manual
47
Installing Other Internal Options
Installing a device in the 3.5-inch front access bay
This section explains how to install an internal option such as a 3.5-inch hard disk drive or magneto-
optical disk drive to your PC. Here is an example of installing a magneto-optical disk drive.
optical disk drive to your PC. Here is an example of installing a magneto-optical disk drive.
1
Make a setting on the option to be installed.
Refer to the manual for the option and make a Master/Slave/Cable Select setting.
Refer to the manual for the option and make a Master/Slave/Cable Select setting.
2
If brackets are attached to both sides of the internal option to be installed, remove the
brackets.
Remove the four screws to remove the brackets.
brackets.
Remove the four screws to remove the brackets.
3
Unplug the PC.
4
Remove the upper cover.
5
Remove the reinforcement bracket.
6
Remove the blank panel.