DELL 2710 User Manual
Removing the Infrared-Emitter Port |
107
48
Removing the Infrared-Emitter Port
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Prerequisites
1
Remove the back cover. See "Removing the Back Cover" on page 19.
2
Remove the stand. See "Removing the Stand" on page 47.
3
Remove the trim cover. See "Removing the Trim Cover" on page 87.
4
Remove the I/O panel. See "Removing the I/O Panel" on page 91.
5
Remove the system-board shield. See "Removing the System-Board Shield" on
page 31.
page 31.
6
Remove the inner frame. See "Removing the Inner Frame" on page 95.
7
OM_Book.book Page 107 Friday, April 27, 2012 3:23 PM