Intel MPCBL0010 User Manual

Intel NetStructure

®

 MPCBL0010 Single Board Computer

October 2006

Technical Product Specification

Order Number: 304120

37

This section defines the Intel NetStructure

®

 MPCBL0010 Single Board Computer 

operating and storage environments. It also documents the procedures followed to 

determine the reliability of the MPCBL0010 SBC.

The MPCBL0010 SBC form factor is mechanically compliant to PICMG 3.0 specification 

of 322.25 mm x 280.00 mm (12.687" x 11.024"). The board pitch is 6HP, and the PCB 

thickness is 2.0 mm  (+/-0.2 mm).

The MPCBL0010 SBC has a rugged metal backing plate that forms a single-piece 

faceplate. This backing plate is made of stainless steel (SS304) and is approximately 

0.65 mm thick on bottom, and 1.0 mm thick at the faceplate. The top cover is made 

from stainless steel (SS304) and is approximately 0.65 mm thick. A removable cutout 

is provided in the top cover for easy access to memory modules.The solid backing plate 

and top cover provides PCB stiffening, enhanced EMI protection from adjacent boards, 

and protection during flame tests.

Removing the backing plate can damage the components on the board and may void 

the warranty. No user-serviceable parts are available under the PCB. Do not remove 

the face plate/backing plate.

The MPCBL0010 SBC meets the board-level specifications as specified in the Intel 

Environmental Standards Handbook – Telco Specification, Document #A78805-01. The 

test methodology is a combination of Intel and NEBs test requirements with the intent 

that the product will pass pure system-level NEBs testing. Intel will not be completing 

NEBs testing on the SBC. The following table summarizes environmental limits, both 

operating and nonoperating.

Temperature 

(Ambient)

Operating

0 to 55° C

Storage

-40 to 70° C

Airflow

Operating

30 cubic feet per minute (CFM) minimum

Humidity

Operating

15%-90% (non-condensing) at 55° C

Storage

5%-95% (non-condensing) at 40° C