GE BC5002 User Manual
5-2
Intelligence Panel PC User’s Manual – August 2003
GFK-2023C
5
System Startup for Windows NT Units
Connecting a PS/2 keyboard and mouse is recommended before you get started. You
need a PS/2 keyboard for convenience. An alternate approach is to use the soft keyboard
and touch panel.
need a PS/2 keyboard for convenience. An alternate approach is to use the soft keyboard
and touch panel.
1
.
Plug in the keyboard, PS/2 mouse (if available), and power cord.
2
.
Power on the unit.
3
.
Read the license agreement
4
.
T
AB
to your choice and press
E
NTER
.
5
.
Press E
NTER
to start the Windows NT Setup.
6
.
Type your name.
7
.
Press the T
AB
key and type your company name.
8
.
Press E
NTER
.
9
.
Enter the Windows NT Authentication number found on your Windows NT manual.
You will need to use the T
You will need to use the T
AB
key to get to each number field. If correct, press E
NTER
.
Note: Computer names must be less than or equal to ten characters to
run CIMPLICITY HMI software. Each computer on a network
must have a unique name.
must have a unique name.
10
.
Enter a Computer name. This name must be different from other computer names on
the same network. Press E
the same network. Press E
NTER
.
Note: Your system has been set up to enable auto logon. Auto logon
allows the system to boot into Windows NT without your having to
use a keyboard to press C
use a keyboard to press C
TRL
-A
LT
-D
EL
.
11
.
You will be prompted for a password.
• To use the auto logon feature, type admin for the password. Press the T
AB
key
and type admin in the Confirm Password box. Press E
NTER
.
• To skip the password, press E
NTER
• To assign a password, type in a password, press the T
AB
key, and type the
password in the Confirm Password box. Press E
NTER
.
12
.
Press E
NTER
to continue with Windows NT Setup.
Note: The factory setting for the IP is 111.111.111.111 and for the
Subnet is 255.0.0.0. If necessary, consult your network
administrator to select appropriate addresses.
administrator to select appropriate addresses.
13
.
After completing the network setup, the system will copy files over and finalize its
setup.
setup.
14
.
At the end of the setup process, you will be asked to reboot the system. Press
E
NTER
.