Emerson RTM-ATCA-7150 User Manual
Installation of the RTM-ATCA-7150
ATCA-7150 and RTM-ATCA-7150 Getting Started (6806800G42B)
42
2.5.2
Removing Filler Blades
If the slot is occupied with a filler blade you have to remove it first.
After a filler blade is removed, place it in the equipment room or other moisture-proof and
dust-proof places.
dust-proof places.
You should install a blank filler blade in the slot after removing the blade. Otherwise, it may
effect the ventilation, heat dissipation, electromagnetic shielding and dust prevention of the
shelf.
effect the ventilation, heat dissipation, electromagnetic shielding and dust prevention of the
shelf.
If this is the first installation for the shelf, the blade is fully configured and the shelf is not
powered on, you can remove all the filler blades. Then, install blades in the slots in order. This
document takes the first installation as an example.
powered on, you can remove all the filler blades. Then, install blades in the slots in order. This
document takes the first installation as an example.
If you want to install multiple blades in the shelf that is powered on shelf, you can remove a
filler blade and then install a blade one by one.
filler blade and then install a blade one by one.