Emerson Series 600 User Manual

The Data Collection Module requires a connection to an existing network via an Ethernet cable. An 

RJ-45 jack is built directly into the bottom of the faceplate of the DCM and located adjacent to the 

power supply connection. The DCM may also be connected via modem through COM2 serial port.
By connecting to your existing network with an Ethernet cable, you will be able to access the DCM via 

your Internet browser. Figure 105 displays the LAN connection, which is located on the bottom side 

of the DCM.

DHCP is enabled at the factory. A connected DHCP Server automatically assigns an IP Address to 

the DCM. To confirm that the DCM is enabled and operative, check the Liebert FS Control Panel. 

From the Main Menu Screen, select number 2 “View” screen.

Select the number 5 “Options” screen to view the current status of the options. To enable or disable 

this option, select and press the number 1 for the DCM option. To exit this screen, press the F6 or 

“Done” key.

1. TIME/DATE
2. TEMPERATURES
3. VOLTAGES
4. HISTORY
5. OPTIONS

6. NETWORK
7. ELECTRICAL
8. VITALS

HOME

MENU>VIEW

DONE

1. DCM 
2. VIB

HOME

DONE

: INOPERATIVE
: OPERATIVE