Emerson Series 600 User Manual

5. Use a forklift to remove the cabinet from the shipping pallet. 

To lift the Liebert FS, the forks should be inserted between the caster wheel assemblies (see 

Figure 10). Forks must be extended to the full depth of the cabinet—at least 6 ft. (2m) fork 

length—to properly support the equipment (see Figure 10). This likely requires fork extenders. 

The Liebert FS unit can weigh up to 1,300 lb. (590kg) and must be handled with care.

6. Unbolt and remove the two metal support plates (one on either side of the pallet).

7. Examine the Liebert FS internally and externally for transit damage. Report any damage to the 

shipper, your local Liebert representative and Liebert immediately.

8. Check visually for loose connections and unsecured components in the cabinet.
9. You will find the installation manual, operation manual and options manual (if any) enclosed in 

the pocket inside the cabinet door (see Figure 12).

10. You will find the serial number and model number plate mounted on the cabinet door pocket or on 

the upper right corner of the face of the cabinet frame inside the door (see Figure 12). Record the 

model number and serial number in Table 1 - System information.

NOTE
Retain the four bolts (1/2" diameter x 1-3/4" long; 12.7mm diameter x 44.5mm long) attaching 

Do not attempt to install the system if there is any damage.