Emerson NX User Manual

ManageUPS NET Adapter III offers an open approach to network power management by delivering a 

complete set of manageability options including: WEB, Telne and Out-Of-Band accessibility, in 

addition to the full-featured, embedded SNMP agent. Event messages are also available as e-mail and 

SNMP Traps - a truly versatile tool for managing Liebert NX UPS systems in a network environment.
The software features:

• DHCP Network Configuration—Supports automatic IP settings configuration using the 

DHCP protocol. The DHCP server must be located on a network that is accessible from the LAN 

that ManageUPS-II is connected to.

• Multiple Network Access Methods—Site power and UPS status information can be accessed 

securely from any computer on your network. View UPS system status in real time for situational 

decision support. Access via Telnet, SNMP, or Web Browser. SNMP Agent conforms to RFC1628 

Standard UPS MIB.

• Network Shutdown—ManageUPS includes a UPS status server and a network shutdown 

controller. Use these features with host shutdown software (RCCMD, MopUPS NSA, MopUPS 

Professional or MopUPS P/R) to ensure safe shutdown of multiple servers, workstations or PCs in 

TCP/IP network environments.

• Event and Data Logging—ManageUPS II keeps a log file of UPS events and environment data. 

On-board log file viewer lets you filter records for easy analysis.
For details, see 

Table 3 gives details of the various combinations of connectivity solutions that can be used with the 

Liebert NX. Only one of the combinations may be used at a time. Other combinations may be possible. 

For further information, see 

 The following interfaces can 

be found on the Liebert NX:
Table 3

XS3

Slot available for use with a connectivity option, typically ManageUPS 

NET III Adapter

Serial

XS6

Slot for the LIFE.net slot modem

Serial

X3

Standard serial interface RS232 COM - female –

Available, if XS3 slot is empty or MUN III card is installed

Serial

X6

Standard serial interface RS-232 COM for external LIFE.net kit (e.g. 

LIFE.net, GSM modem) only is XS6 is empty - male - Not available, if a 

XS6 slot modem is installed

Serial

X19

2x15-pole screw connector for parallel UPS connection

X20

RJ45 interface for synchronization with external signal

TB1

16-pole screw connector for input contacts (see 3.4.1 - Available 

Input

TB2

16-pole screw connector for output contacts (see 3.4.2 - Available 

Output

XT 3/8

4-pole screw for EPO input and output

Input and Output

XT1

External battery temperature sensor connection

Input

TB3

Battery Interface and SKRU Key Status

Input and Output

TB4

SKRU Enable Status

Input and Output