Emerson 4015 User Manual
Installation Instructions
IM584000300
Spec. No. 584000300 (Model 4015-X003)
Issue AB, April 3, 2013
Important Safety Instructions
Page iii
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
IMPORTANT SAFETY INSTRUCTIONS
GENERAL SAFETY
DANGER! YOU MUST FOLLOW APPROVED SAFETY PROCEDURES.
Performing the following procedures may expose you to hazards. These procedures
should be performed by qualified technicians familiar with the hazards associated with
this type of equipment. These hazards may include shock, energy, and/or burns. To
avoid these hazards:
should be performed by qualified technicians familiar with the hazards associated with
this type of equipment. These hazards may include shock, energy, and/or burns. To
avoid these hazards:
a) The tasks should be performed in the order indicated.
b) Remove watches, rings, and other metal objects.
c) Prior to contacting any uninsulated surface or termination, use a voltmeter to
verify that no voltage or the expected voltage is present.
d) Wear eye protection, and use recommended tools.
e) Use double insulated tools appropriately rated for the work to be performed.
f) Do not work on an energized system without full arc flash and PPE protection.
DANGER! All power and control wiring should be installed by a qualified electrician.
All power and control wiring must comply with the National Electrical Code (NEC) and
applicable local codes. For operation in countries where the NEC is not recognized,
follow applicable codes.
All power and control wiring must comply with the National Electrical Code (NEC) and
applicable local codes. For operation in countries where the NEC is not recognized,
follow applicable codes.
CAUTION! Performing maintenance and/or troubleshooting procedures may interrupt
power to the loads, if battery reserve is not sufficient or present.
power to the loads, if battery reserve is not sufficient or present.
VOLTAGES
AC Input Voltages
DANGER! This system operates from AC voltage capable of producing fatal electrical
shock. AC input power must be completely disconnected from the branch circuits
wiring used to provide power to the system before any AC electrical connections are
made. Follow local lockout/tagout procedures to ensure upstream branch circuit
breakers remain de-energized during installation. DO NOT apply AC power to the
system until all electrical connections have been completed and checked.
shock. AC input power must be completely disconnected from the branch circuits
wiring used to provide power to the system before any AC electrical connections are
made. Follow local lockout/tagout procedures to ensure upstream branch circuit
breakers remain de-energized during installation. DO NOT apply AC power to the
system until all electrical connections have been completed and checked.
DC Input/Output Voltages
DANGER! This system produces DC power and may have a battery source connected
to it. The DC voltage IS hazardously high and the rectifiers and/or battery can deliver
large amounts of current. Exercise extreme caution not to inadvertently contact or
have any tool inadvertently contact an output terminal or battery terminal or exposed
wire connected to an output terminal or battery terminal. NEVER allow a metal object,
such as a tool, to contact more than one termination at a time, or to simultaneously
contact a termination and a grounded object. Even a momentary short circuit can
cause explosion and injury. Remove watches, rings, and other metal objects before
connecting battery leads.
to it. The DC voltage IS hazardously high and the rectifiers and/or battery can deliver
large amounts of current. Exercise extreme caution not to inadvertently contact or
have any tool inadvertently contact an output terminal or battery terminal or exposed
wire connected to an output terminal or battery terminal. NEVER allow a metal object,
such as a tool, to contact more than one termination at a time, or to simultaneously
contact a termination and a grounded object. Even a momentary short circuit can
cause explosion and injury. Remove watches, rings, and other metal objects before
connecting battery leads.
Follow local lockout/tagout procedures to ensure DC branch circuit breakers remain
de-energized during installation at loads, as required.
de-energized during installation at loads, as required.
Extreme caution is required when performing maintenance. Be constantly aware that
this system contains high DC as well as AC voltages.
this system contains high DC as well as AC voltages.
The maximum output voltage is 400V DC and is potentially lethal.
Check for voltage with both AC and DC voltmeters prior to making contact.