Furman Sound PS-PRO User Manual

Page of 12
P S - P R O   -   P O W E R   CO N D I T I O N E R / S E Q U E N C E R
force that represents the most difficult circumstance 
faced by a power protection product. The degree 
of protection a PS-PRO can offer depends on the 
intensity of the strike. If lightning strikes a distant 
power line and causes a relatively small disturbance 
to reach your location, the spike suppressors in the 
PS-PRO  will  absorb  the  excess  voltage  invisibly 
and harmlessly. However, if lightning strikes the 
actual building where the PS-PRO is installed (or 
somewhere very nearby), some damage may be 
unavoidable  due  to  the  extremely  high  voltage 
and current present. If this does occur, most likely 
damage will be limited to the PS-PRO itself and will 
affect only certain spike suppression components 
(called varistors or MOV’s.) In this “suicide” mode, 
the  PS-PRO  may  sustain  minor  damage  but 
generally will protect all equipment plugged into 
it  from  much  more  serious  and  costly  damage 
as long as that equipment is properly grounded. 
Proper grounding requires the use of three-prong 
AC cords, and that the building’s outlets are actually 
grounded  to  earth  as  specified  by  the  National 
Electrical Code.
Any PS-PRO known to have taken a direct lightning 
hit should be checked by a qualified technician or 
the Furman factory to determine whether the MOV’s 
need replacement. (If the PS-PRO’s PROTECTION OK 
indicator is not lit, there is definitely some damage. 
Some  spike  suppression  capability  may  still  be 
available by MOV Bank #2, but there is no guarantee 
of this.) For optimum protection, you should not 
rely exclusively on the PS-PRO to protect against a 
direct lightning hit. The first line of defense against 
lightning should be a lightning arrestor installed on 
your building’s electrical service entrance. If your 
building  does  not  have  one,  contact  your  local 
power company or an electrical contractor to have 
one installed.
THREE YEAR LIMITED 
WARR ANT Y
The Furman PS-PRO is protected by a limited three 
year warranty, covering defects in materials and 
workmanship, provided that the registration card is 
filled out and returned by the customer. Otherwise, 
a one year warranty applies. Products must have a 
proof of purchase from a Furman authorized dealer. 
During this period, Furman will make any necessary 
repairs without charge for parts or labor. Shipping 
charges to the factory or repair station must be 
prepaid by the owner; return shipping charges (via 
UPS Ground) will be paid by Furman. 
This warranty applies only to the original owner 
and is not transferable. Also, it does not  apply to 
repairs done other than by the Furman factory or 
Authorized Repair Stations.
This warranty shall be cancelable by Furman at its 
sole discretion if the PS-PRO unit has been sub-
jected to physical abuse or has been modified in any 
way without written authorization from Furman. 
Furman’s liability under this warranty is limited to 
repair or replacement of the defective unit.
Furman will not be responsible for incidental or 
consequential damages resulting from the use or 
misuse of its products. Some states do not allow the 
exclusion of incidental or consequential damages, 
so the above limitations may not apply to you. This 
warranty gives you specific legal rights, and you 
may also have other rights which vary from state 
to state. Warranty claims should be accompanied 
by a copy of the original purchase invoice showing 
9