MGE UPS Systems S EXB 2500 User Manual

34008236EN/AA

 - Page 11

2. Installation

2.5 Connection with a FlexPDU (Power Distribution Unit) module (optional)

  

2.6 Connection with a HotSwap MBP module (optional)

The HotSwap MBP module makes it possible to service or even replace the UPS without affecting the connected loads 
(HotSwap function).
  

 

1 - Evolution S 2500 / S 3000: connect the 
UPS input socket (10) to the AC-power 
source using the cable (31) supplied.
Evolution S 1250 / S 1750 / 2000: use the 
power cable of the protected equipment.

2 - Evolution S 2500 / S 3000: connect the 
input socket on the FlexPDU module (48) to 
the UPS outlet (7) using the cable (41) 
supplied. 
Evolution S 1250 / S 1750 / 2000: connect 
the input socket on the FlexPDU module 
(48) to one of the outlets (9).
The cable and the connectors are marked in 
red.

3 - Connect the equipment to the outlets (45), 
(46) and (47) on the FlexPDU module. These 
outlets differ, depending on the version of the 
FlexPDU module.

4 - Fit the connection securing system that 
prevents the plugs from being pulled out 
accidentally.

 

1 - Connect the input socket (56) on the 
HotSwap MBP module to the AC-power 
source using the cable (31) supplied.

2 - Connect the UPS input socket (10) to the 
"UPS Input" (55) on the HotSwap MBP 
module, using the cable (44) supplied. These 
cables and the connectors are marked blue.

3 - Evolution S 2500 / S 3000: connect the 
UPS outlet (7) to the "UPS Output" (54) on 
the HotSwap MBP module, using the cable 
(44) supplied. 
Evolution S 1250 / S 1750 / 2000: connect 
one of the UPS outlets (9) to the "UPS 
Output" (54) on the HotSwap MBP module.
These cables and the connectors are marked 
in red.

4 - Connect the equipment to the outlets (49) 
and (50) on the HotSwap MBP module. 
These outlets differ, depending on the 
version of the HotSwap MBP module.