MGE UPS Systems 100 User Manual

Page of 30
34003602EN/AB
 - Page 3
Introduction
Thank you for selecting an MGE UPS SYSTEMS product to protect your electrical equipment.
PowerServices TelPac has been designed with the utmost care.
It comes in 2 versions: card (ref. 66096) or external (ref. 66097 or 66098).
The card version can be installed by the customer or by an MGE UPS SYSTEMS After Sales Service technician.
The external version can only be installed by a specialised MGE UPS SYSTEMS After Sales Service technician.
We recommend you take time to read this manual to take full advantage of the many features of this product.
To discover the entire range of MGE UPS SYSTEMS products, visit our Web site at www.mgeups.com or contact your
nearest MGE UPS SYSTEMS representative.
Environment
MGE UPS SYSTEMS pays great attention to the environmental impact of its products during the design and manufacture
stages and through to the end of its life cycle.
MGE UPS SYSTEMS products comply with the strictest regulations.
They do not contain CFCs or HCFCs.
Recycling of packaging
Packaging has been designed to be recycled. Please make sure it is correctly recycled (in compliance with applicable
regulations).
Recycling of products at the end of their life cycle
MGE UPS SYSTEMS undertakes to recycle all recovered products at the end of their life cycle in installations complying
with applicable regulations. Please contact our sales office.
See the environment section on our Web site at www.mgeups.com.
Special precautions
If the card or external unit must be stored prior to installation, always store in a dry location.
Storage temperature range: -10ºC to +70ºC.