APC URTA48XLBPJ User Manual

b. Install the UPS and battery pack battery covers  and bezels . 

6. Go to “Terminal Mode Configuration” on page 9 to configure the UPS to recognize the battery 

pack(s).

The battery pack is equipped with the following connectors. Refer to the UPS user manual for UPS 
connector types and definitions.

TVSS screw

The UPS and battery pack features a Transient Voltage Surge-suppres-
sion (TVSS) screw located on the rear panel, for connecting the ground 

cable on surge suppression devices such as telephone and network line 
protectors.
N

: Prior to connecting the grounding cable, turn off the UPS and 

disconnect it from the utility power outlet.

battery pack 

connector

Smart-UPS RT battery packs provide extended run-time during power 

outages. A maximum of 10 battery packs can be used with the UPS.
N

: See the APC Web site, 

for information on the 

battery pack, SURTA48XLBP or SURTA48XLBPJ.



