APC ACRD500 User Manual
59
InRow RC/RD/RP (600 mm) User’s Guide
APC Device IP Configuration Wizard
Capabilities, Requirements, and Installation
Use the Wizard to configure basic TCP/IP settings
The APC Device IP Configuration Wizard configures the IP address, subnet mask, and default gateway
of one or more cooling units. You can use the Wizard the following ways:
of one or more cooling units. You can use the Wizard the following ways:
• Automatically discover and configure unconfigured cooling units remotely over your TCP/IP
network.
• Configure or reconfigure a cooling unit through a direct connection from the serial port of your
computer to the device that contains the card.
System requirements
The Wizard runs on Microsoft Windows 2000, Windows Server 2003, and Windows XP operating
systems.
systems.
Installation
To install the Wizard from the Utility CD:
1. If autorun is enabled, the user interface of the CD starts when you insert the CD. Otherwise, open
the file contents.htm on the CD.
2. Click on the Device IP Configuration Wizard and follow the instructions.
To install the Wizard from a downloaded executable file:
1. Go to www.apc/tools/download.
2. Download the Device IP Configuration Wizard
3. Run the executable file in the folder to which you downloaded it.
2. Download the Device IP Configuration Wizard
3. Run the executable file in the folder to which you downloaded it.
Note: The cooling units must be on the same network segment as the computer that
is running the Wizard.
is running the Wizard.