APC ACRD500 User Manual
71
InRow RC/RD/RP (600 mm) User’s Guide
Verifying Upgrades and Updates
Overview
To verify that the firmware upgrade was successful, see the Last Transfer Result message, available
through the FTP Server option of the Network menu (in the control console only), or use an SNMP
GET to the mfiletransferStatusLastTransferResult object identifier (OID).
through the FTP Server option of the Network menu (in the control console only), or use an SNMP
GET to the mfiletransferStatusLastTransferResult object identifier (OID).
Last transfer result codes
Use the Web interface to verify the versions of the upgraded AOS and application modules by selecting
the Administration tab, General on the top menu bar, and Factory Info on the left navigation menu, or
use an SNMP GET to the MIB II sysDescr OID.
the Administration tab, General on the top menu bar, and Factory Info on the left navigation menu, or
use an SNMP GET to the MIB II sysDescr OID.
Code
Description
Successful
The file transfer was successful.
Result not available
There are no recorded file transfers.
Failure unknown
The last file transfer failed for an unknown reason.
Server inaccessible
The TFTP or FTP server could not be found on the network.
Server access denied
The TFTP or FTP server denied access.
File not found
The TFTP or FTP server could not locate the requested file.
File type unknown
The file was downloaded but the contents were not recognized.
File corrupt
The file was downloaded but at least one Cyclical Redundancy Check (CRC)
failed.
failed.