APC Power Supply User Manual

Install a Rack ATS in the top of each enclosure for overhead wiring, and in the bottom of each 

enclosure for wiring under the floor. 

The Rack ATS is an optional component, and not all InfraStruXure systems will include it.

Install Rack PDUs in the rear of the NetShelter VX enclosure, in the channel directly behind the rear 

vertical mounting rails. For overhead wiring, make sure that the power cord is pointing toward the 

roof of the enclosure. For wiring under the floor, make sure that the power cord is pointing toward the 

floor.

The Rack PDUs is an optional component, and not all InfraStruXure systems will include it.

Install the InfraStruXure Manager in the enclosure closest to the PDU. The CAT5 data cables 

included with your configuration are of varying lengths, based on the distance components will be 

installed from the PDU. 

Install the Environmental Monitoring Unit according to the installation instructions included with the 

device. The Environmental Monitoring Unit is an optional component, and not all InfraStruXure 

systems will include it.

See the installation instructions in the manual included with your Rack ATS.

See the installation instructions in the manual included with your Rack PDU.

See the installation instructions in the manual included with your InfraStruXure 

Manager.