APC CTFLE User Manual

 

 

                        

1   

 

 

The CTFLE Series Metered Power Supply Enclosure provides a power source for broadband cable 
operations. The enclosure is designed for mounting on the ground. 

This Safety Guide contains important instructions that should be followed during installation and 
maintenance of the APC equipment and batteries.  It is intended for APC customers who setup, 
install, relocate, or maintain APC equipment.  

Do not work alone under hazardous conditions. 

Do not handle any metallic connector before the power has been disconnected. 

Servicing this equipment may require working with protective covers removed 
and utility power connected. Use extreme caution during these procedures. 

High current through conductive materials could cause severe burns. 

When grounding cannot be verified, disconnect the equipment from the utility 
power outlet before installing or connecting to other equipment. Reconnect the 
power cord only after all connections are made. 

Check that the power cord(s), plug(s), and sockets are in good condition. 

Replacement of fuses or other parts must be with identical types and ratings. 
Substitution of nonidentical parts may cause safety and fire hazards. 

These units are heavy. Use proper lifting techniques and equipment to avoid 
injury.