APC PDPM150G6F User Manual

Note: Contact wires from external signaling, alarming, and sensing devices may be connected to the 
interface board to allow the controller to monitor these devices and to also control outside devices 
through the output contacts.

1 Open the front door and remove the top safety panel. 

2 Note the location of the interface board at the top of the 

PDU.

3 Loosen the captive screws and remove the plate. Remove the 

3/4-in (64-mm) knockout. 

4 Run the contact cables through the hole to the interface board.

pdx

08

26

a

2

1

3

4