Anton/Bauer HyTron 100 User Manual

 

 

 

 

 

 
Charge this battery fully before using.  Allow the battery to reach a 
steady green (LifeSaver

®

) mode before using.  Charging is automatic on 

all Logic Series InterActive chargers.  The flashing red and green lights 
indicate the charger and battery are establishing communications.  The 
following are the standard indications on any Logic Series InterActive 
Charger (Please refer to the Charger manual for complete charging 
instructions): 

•  Alternating red and green: Evaluating battery and/or 

rejuvenating low voltage battery. 

•  Steady red:  Battery waiting to charge (may either be in line to 

charge or holding for temperature stabilization). 

•  Flashing red:  Charging. 
•  Flashing green:  Balancing mode or Ready/Verifying.  Battery 

is typically more the 80% charged. 

•  Steady green:  LifeSaver mode.  Batteries will remain 100% 

ready for use indefinitely. 

 

The battery should remain on the charger until just prior to being 
used.  The patented LifeSaver maintenance routine keeps the battery 
100% charged and balanced by eliminating the typical self-discharge that 
can cripple a battery that is stored for any length of time on the shelf.  Do 
not remove the HyTRON batteries from the charger more than 8 hours 
prior to actual use.  For best results, this battery should be returned to the 
Logic Series InterActive charger within 48 hours of being used.  Please 
read the individual charger Owner’s Manual to become acquainted with 
the many unique features of the chargers. 

6