APC 15000 RAID User Manual

Controller Installation

18 

007-5510-002

For example, to change the system date to March 1, 2009, enter: 

   date 3 1 2009

<Enter>

 

To set the system time, at the prompt, type:

 

 time hh:mm:ss

<Enter>

where hh represents the two digit value for hour (00 to 24), mm is the two digit value for minutes, and 
ss represents the two digit value for seconds

For example, to change the system time to 2:15:32 p.m., enter: 

   time 14:15:32

<Enter>

 

NOTE :The system records time using the military method, which records hours from 00 to 24, not 

in a.m. and p.m. increments of 1 to 12.

When the controller system is first configured, it is necessary to select a tier mapping mode for the 
attached enclosures. 

The controller currently supports SAS drive enclosures. 

To display the current mapping mode, type: 

tier map

<Enter>

. 

Tier Changemap Screen

To change the mapping mode (Figure 2–4): 

Enter: 

tier changemap

<Enter>

 

Enter the appropriate mapping mode.  

•For 10 and 20 box solutions, choose SAS_2X.

•For 5 box solutions, choose SAS_1X.

For the changes to take effect, enter: 

restart

<Enter>

.