Anton/Bauer ProPac 13/14 User Manual

 

 

 

- 1 - 

1.  Premium Fast Charge Cells - Unlike conventional cells that are 

stressed or damaged by fast charging, these cells are designed 
specifically for optimum life and performance. 

2.  High Voltage Design - The 13.2 or 14.4 volt design of the Logic 

Series battery complies precisely with equipment manufacturers’ 
specifications, eliminating all the problems that cripple 12 volt 
batteries. 

®

 Case design -  The computer designed high impact case 

eliminates conventional stress points.  A proprietary internal rib 
system cradles each individual cell.  These features protect the cells 
from impact that would damage or destroy conventional batteries. 

®

 Interface -  The solid metal “H” design mounting studs 

assure a smooth, precise mounting for the life of the battery.  The 
Logic Series connector assembly features multiple gold plated, self 
aligning contacts and is compatible with all existing Anton/Bauer

®

 

camera mounts and accessories. 

5.  Individual Computer Testing - Like all professional Anton/Bauer 

batteries, the Logic Series battery has been individually computer 
tested.  For assurance of optimum capacity, voltage and overall 
quality, a computer print-out is enclosed. 

Virtually all cameras/camcorders will indicate a low voltage warning or 
cease to operate at about 11 volts.  Unfortunately, a 12 volt battery must be 
discharged to 10 volts for full discharge.  Thus, a camera/camcorder 
operating on a 12 volt NiCad will always cease to operate before fully 
discharging the battery, leaving 50% of the total capacity unused under 
certain conditions.  The amount of this wasted capacity can vary each day 
depending on temperature, etc., thus creating what appears to be totally 
inconsistent performance.