B&K 1787B User Manual

 

31 

The first step for communication is to configure the system, click Configure button           , the 

windows will display as follows:     

 

 

 

 
 

 

 

Status bar will give you the  communication information.  When the communication is successful, the 
status bar will display as follows: 

 
 
 
                                                           

1. Model number, it will display the  real  part number  of the field power supply  which  detected by the 

computer. (6811/6812/6821/6822/6823……..).   

 
2. Operation status (Operation correct/Check error), if Check error appears here, it means that there 

is check error for your last operation command. 

 
3. Communication status (Communication successful/Communication waiting), if Communication 

waiting appears here for more than 10 seconds, you need to check if there is any connection failure 
between computer and power supply. After confirming the effective connection, then re-configure the 
baud rate, address, comport etc, to make sure the same baud rate and address between power 
supply and computer. 

 

Communication status 

Operation status 

Model number 

1)  Comm: to set the communication port, baud rate and 

address. 

2)   2)  Max voltage: to set a maximum voltage value in the 

voltage range. For example, the voltage range of 
IT6822 is 0~32V, then you can set a maximum voltage 
at 24V. 

3) Voltage step: to set the step size of Arrow key, page 

up/down key, and  Mouse-wheel. When you set the 
value by clicking the knob, you can use the arrow keys 
(?, ?, ? , ? ), page up/down keys or mouse wheel to 
adjust the value more slightly. 

4) Reload last parameter: if you select it, then it will reload 

the parameter settings of last time you close this 
software.