3M 10700 User Manual
7
Specifications
(Continued)
8.
Box Board:
Style: regular slotted containers, RSC
125 to 275 P.S.I. bursting test, single wall or double wall B or C flute.
23-44 lbs. per inch of width Edge Crush Test (ECT)
125 to 275 P.S.I. bursting test, single wall or double wall B or C flute.
23-44 lbs. per inch of width Edge Crush Test (ECT)
9.
Box Weight and Size Capacities:
A. Box Weight Range 5 lbs.–65 lbs. [2.3 kg–29.5 kg]. Contents must support flaps.
B.
Box Size:
Minimum
Maximum
Length:
150 mm [6.0 inches]
Unlimited
Width:
150 mm [6.0 inches]*
550 mm [21.5 inches]
Height:
120 mm [4.75 inches]**
550 mm [21.5 inches]
*
Cartons narrower than 250 mm [10 inches] in width may require more frequent belt replacement
because of limited contact area.
because of limited contact area.
**
95 mm [3.75 inches] height with heads adjusted to apply 50 mm [2 inches] tape leg lengths. See "Special
Setup Procedure".
Setup Procedure".
Note: The case sealer can accommodate most boxes within the size range listed above. However, if the box
length (in direction of seal) to box height ratio is 0.5 or less, then several boxes should be test run to ensure
proper machine performance.
length (in direction of seal) to box height ratio is 0.5 or less, then several boxes should be test run to ensure
proper machine performance.
DETERMINE THE BOX LIMITATIONS BY COMPLETING THIS FORMULA:
BOX LENGTH IN DIRECTION OF SEAL = SHOULD BE GREATER THAN 0.5
BOX HEIGHT
Any box ratio approaching this limitation should be test run to ensure proper performance.
(Specifications continued on next page.)