Adder Technology Adder TS4 User Manual

Connections to the Adder TS4 unit do not need to follow the precise order 
given in this user guide, although if one or more systems must be 

, 

connect these after all other connections have been made.

To connect a system (PS/-style connections)
Note: Two Adder VSC3 link cables are required per connected system.  

1  Ensure that the computer system to be connected is switched off and power 

is removed from the Adder TS4. 
(Note: If it is not possible to switch off systems prior to connection, then 
a ‘Hot plug’ procedure is available – see the 

2  At the rear panel of the Adder TS4 unit, attach a VSC3 link cable to the 

(purple) keyboard socket of port 1.

To connect a system (USB-style connections) 
Note: Two Adder VSC3 link cables plus one CCP2U converter are required per 
connected system.

1  At the rear panel of the Adder TS4 unit, attach a VSC3 link cable to the 

(purple) keyboard socket of port 1.

2  Attach the other end of the VSC3 link cable to the inline keyboard socket of 

the CCP2U converter.

3  Repeat steps 1 and 2 for the mouse connection (green) between the Adder 

TS4 port 1 and the CCP2U converter.

3  Attach the other end of the VSC3 link cable to the keyboard socket (usually 

coloured purple) on the first system.

4  Repeat steps 1 and 2 for the mouse connection (green) between the Adder 

TS4 port 1 and the first system. 

mouse link cables, that lead to each system, using several cable ties.   

5  Repeat the above steps for systems 2, 3 and 4 to the corresponding ports of 

the Adder TS4. If any systems do not have PS/2-style keyboard and mouse 
connectors, please use an Adder CCP2U converter, as discussed opposite.

  Note: For neatness and accessibility it is advisable to join the keyboard and 

4  Attach the USB connector of the CCP2U converter to a vacant USB socket of 

the first system.

5  Repeat the above steps for any other system that requires USB connections.