TP-LINK TL-SG2109WEB User Guide
57
Web Smart Gigabit Switch Family User's Guide
TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB
Trunk: The Trunk number.
Member: Select the member of the Trunk here. Each group has 4 optional
ports to compose a Trunk.
Storm Control: configure the storm control for the Trunk here. All member
ports of the Trunk share the same settings. Subfield of the Storm Control
are the same as that of the port storm control, see phase 5.3.2.4 for
details.
Select All: Select all Trunk members in the list.
Clean Up: Clean up the Trunk member list.
Member: Select the member of the Trunk here. Each group has 4 optional
ports to compose a Trunk.
Storm Control: configure the storm control for the Trunk here. All member
ports of the Trunk share the same settings. Subfield of the Storm Control
are the same as that of the port storm control, see phase 5.3.2.4 for
details.
Select All: Select all Trunk members in the list.
Clean Up: Clean up the Trunk member list.
Notice:
1) Each Trunk should contains 2 to 4 ports (If a Trunk is submitted with 0
member port, it indicates to delete the Trunk).
2) SFP and 1000M port in TL-SL2210WEB/TL-SL2218WEB/TL-
SL2428WEB/TL-SL2452WEB, is not able to be the Trunk member.
3) Trunks cannot be set if the switch is in MTU VLAN mode.
5.3.6 Priority Setting
Priority setting contains four topics: priority mode, port-based priority, port
default priority and 802.1p priority.
default priority and 802.1p priority.
Because dynamic menu is adopted, only the pages corresponding to current
priority mode are revealed. If the parameters of other priority modes are to be
configured, select the corresponding priority mode in “Priority Mode” page first.
priority mode are revealed. If the parameters of other priority modes are to be
configured, select the corresponding priority mode in “Priority Mode” page first.
5.3.6.1 Priority Mode
This page is shown below: