TP-LINK TD-8816 User Manual

 

6 

 

Figure 2-4 Wall-mount Install 

)

The diameter of the screw, 4mm<D<7.5mm, and the distance of two screws is 111.5mm. The 
screw that project from the wall need around 4mm based, and the length of the screw need to be 
at least 20mm to withstand the weight of the product. 

Before installing the device, please make sure your broadband service provided by your ISP is 

available. If there is any problem, please contact your ISP. You need to connect the device to the 

phone jack, the power outlet, and your computer or network. Before cable connection, cut off the 

power supply and keep your hands dry. You can follow the steps below to install it. 

Step 1:  Connect the ADSL Line. 

Method one: Plug one end of the twisted-pair ADSL cable into the ADSL port on the rear 

panel of TD-8816, and insert the other end into the wall socket. 

Method two：You can use a separate splitter. External splitter can divide the data and 

voice, and then you can access the Internet and make calls at the same time. The 

external splitter has three ports: 

•

  LINE: Connect to the wall jack 

•

  PHONE: Connect to the phone sets 

•

  MODEM: Connect to the ADSL port of TD-8816