TP-LINK TD-8816 User Manual

 

50 

Choose “Access Management→SNMP”, you can see the SNMP screen( shown in Figure 4-40). 

The Simple Network Management Protocol (SNMP) is used for exchanging information between 

network devices. 

 

Figure 4-40 

¾

  SNMP: Activate or deactivate the function. 

¾

  Get Community: Select to set the password for the incoming Get requests from the 

management station. 

¾

  Set Community: Select to set the password for incoming Set requests from the 

management station. 

¾

  Trap Host: Enter the trap host here. 

Choose “Access Management→UPnP”, you can configure the UPnP in the screen (shown in 

Figure 4-41). 

UPnP (Universal Plug and Play) is a distributed, open networking standard that uses TCP/IP for 
simple peer-to-peer network connectivity between devices. An UPnP device can dynamically join 
a network, obtain an IP address, convey its capabilities and learn about other devices on the 
network. In turn, a device can leave a network smoothly and automatically when it is no longer in 
use. UPnP broadcasts are only allowed on the LAN.   

 

Figure 4-41