TP-LINK TL-SL2452WEB User Guide
41
Web Smart Gigabit Switch Family User's Guide
TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB
Limit Rate: Indicates the maximum rate (kilobytes per second) at which
the controlled packets configured above are forwarded. For the 1000M
port, if set the value of 64K, the actual value is about 70Kbps.
the controlled packets configured above are forwarded. For the 1000M
port, if set the value of 64K, the actual value is about 70Kbps.
Notice:
Parameters of Trunk member ports display the parameters of the Trunk they
belong to and cannot be configured here (see port 5 and 6 in the figure for
example). You can configure parameters of the Trunk in the “Port Trunking”
page.
belong to and cannot be configured here (see port 5 and 6 in the figure for
example). You can configure parameters of the Trunk in the “Port Trunking”
page.
5.3.2.5 Port Description
This page configures the description to indicate the ports.
Input description words in the Description filed for each port. Notice that at
most 15 letters or numbers can be held in each field.
most 15 letters or numbers can be held in each field.
Figure 5-25 Port Description
5.3.3 Network Setting
This page contains the following topics: switch IP address, static MAC
address, filtering MAC address, dynamic binding, bound MAC address, aging
time and ping.
address, filtering MAC address, dynamic binding, bound MAC address, aging
time and ping.