TP-LINK TL-SG3424P User Manual

Dynamic Router

Ports：

Displays the dynamic router ports of this VLAN.

Note:

1. The MLD snooping function in a VLAN will take effect when global MLD Snooping function is

enabled in

and the VLAN is created in

2. When the router port aging time or member port aging time is set for a VLAN, this value

overrides the value configured globally in

8.2.3 Filter Config

When the switch receives MLD report messages, it examines the multicast filtering ID and filter

mode configured on the access port to determine if the port can join the multicast group. If the port

can join the multicast group, the switch will add the port to the forward ports list of the multicast

group. Otherwise, the switch will drop the MLD report messages. In that way, you can control the

multicast groups that users can join in.
Choose the menu

Multicast→MLD Snooping→Filter Config to load the following page.

The following entries are displayed on this screen:



Filter Config

Filter ID:

Enter the Filter ID which identifies the filter.

Start Multicast IP:

Enter the start of the IP range.

End Multicast IP:

Enter the end of the IP range.



Filter List

Select:

Select the filter ID you want to change.

Filter ID:

Displays the filter ID number.

Start Multicast IP:

Displays the start of the IP range.

End Multicast IP:

Displays the end of the IP range.

Note:

The max number of filter entries is 30.

131