Cabletron Systems CSX400-DC User Manual

108

CSX400 and CSX400-DC User’s Guide

This section describes the fields in the IP Routing Configuration section of the Routing 
configuration window.

Displays an interface number assigned an IP subnet.

Displays the IP subnet assigned to the interface number.

Displays the Subnet Mask assigned to the interface number.

The Next Hop is the IP address of the IP port of the next router (in the direction of 

the subnet that you are defining).

Displays the Default Route window. You can select one interface to be a 

default route. A default route forwards all packets that are not defined in the routing table to the 
interface defined in the Default Route window (Unnumbered Routing Only). To set up a default 
route in “Numbered Mode” communication, click the Add Route button and enter IP Subnet 
000.000.000.000, and Subnet Mask 255.255.255.255. Then use the NEXT HOP window to enter 
the IP Address of the router you wish to designate as the default route.

This button allows you to add a route and to configure the CSX400 to forward 

only those packets from the specified route.

This button allows you to delete a route

This button allows you to access the Advanced Routing configuration window.

This section describes the fields in the IPX Routing Configuration section of the (IP/IPX) Routing 
configuration window that is used to assign an IPX network number.

Displays all interface numbers which can be assigned an IPX network number.

Displays the active IPX network number assigned to an interface. 

The IPX Host Map button takes you to the IPX Host Map window. IPX Host Map 

entries are used for IPX routing in Frame Relay mode only.

Use this button to change an entry in the IPX Routing Configuration window. Select 

the interface number to modify by clicking on the tab to the left of the interface number.