Cabletron Systems ESXMIM-F2 User Manual

Chapter 4: The System Level Screen

3. Press ENTER to set the system clock.

4. Use the arrow keys to highlight the SAVE command field at the 

bottom of the screen and press ENTER.

If the time entered was a valid format, the Event Message field at the 
top of the screen displays “SAVED OK”. If the entry was not valid, 
Local Management does not alter the current value and refreshes the 
System Time field with the previous value.

To set the host IP address, perform the following steps:

1. Use the arrow keys to highlight the Host IP Address field.

2. Enter the IP address using Decimal Dotted Notation (DDN) format. 

For example: 134.141.25.17

3. Press ENTER. If the IP address entered was a valid format, the cursor 

returns to the beginning of the Host IP Address field. If the entry was 
not valid, the Event Message field displays “INVALID IP ADDRESS 
OR FORMAT ENTERED”. Local Management does not alter the 
current value and refreshes the Host IP Address field with the previous 
value.

4. Use the arrow keys to highlight the SAVE command field.

5. Press ENTER. The Event Message field at the top of the screen 

displays “SAVED OK”. This message flashes briefly, then the Event 
Message line will display “System Reboot in Progress...”. Local 
Management will be terminated and the screen will freeze while the 
ESXMIM resets.

Changing the ESXMIM IP address requires a reset of the 
module. LM will automatically reset the ESXMIM, which will go 
through startup operations before bridging will resume.