Intel 10/100 User Manual

64

C H A P T E R

3

set-br-fwdel <forward_delay>

Sets the spanning tree bridge forward delay. Forward delay is the time
interval in seconds spent waiting to change a port from its spanning
tree preforwarding state to a forwarding state. This is necessary
because every bridge on the network should ensure no loop is formed
before allowing the port to forward packets.

 is in seconds, from 4 to 30. However, the

corresponding MIB variable, dot1dStpBridgeForwardDelay (RFC
1493), is in hundreths of seconds from 400 to 3000, and must be a
multiple of 100.

set-prt-prio <port_number> <port_priority>

Sets the spanning tree port priority. 

 is the decimal port

number, and 

 is a number from 1 to 255. This is

equivalent to setting the MIB variable dot1dStpPortPriority
(RFC 1493).

set-prt-enb <port_number> {enable|disable}

Enables or disables a port in the spanning tree. 

 is the

decimal port number. This is equivalent to setting the MIB variable
dot1dStpPortEnable (RFC 1493).

set-prt-pcost <port_number> <path_cost>

Sets the spanning tree port path cost. 

 is the decimal port

number, and 

 is path cost from 1 to 65535. This is

equivalent to setting the MIB variable dot1dStpPortPathCost
(RFC 1493).